該頁無縮略圖
43020世界杯獎杯遙控?zé)艄獍惭b教程
Installation Tutorial for 43020 World Cup Trophy Remote Control Light
燈光材料如下
積木拆起
The lighting materials are as follows
Take the building blocks apart
拿出燈線，將第一節燈帶安裝如下
Take out the light wire and install the first section of the light strip as follows
拿出最長的一節2燈導線
Take out the longest section of the 2-lamp wire
把積木拆起
Take the building blocks apart
把2燈燈條安裝如下
Install the two light strips as follows
積木安裝還原并將導線藏積木內
Reinstall the building blocks and hide the wires inside them
拿出剩下的兩節2燈燈條
將2燈燈條安裝在積木上如圖
Take out the remaining two sections of the 2-lamp strip
Install the two light strips on the building blocks as shown in the picture
將積木轉到另一側,把剩下的2燈燈條安裝如下
把積木拆起
Turn the building blocks to the other side and install the remaining two light
strips as follows
Take the building blocks apart
拿出透明黃配件和燈粒導線安裝如下
Take out the transparent yellow accessory and the lamp particle wire and
install them as follows
把導線藏于積木內并還原
Hide the wires inside the building blocks and restore them
將積木拆起,把導線穿過積木
Take the building blocks apart and pass the wires through them
還原積木,多余導線藏于積木內
Restore the building blocks, with the extra wires hidden inside the blocks
轉到另一側,安裝最后一顆燈粒
拿出黃色配件和燈粒安裝如下
Turn to the other side and install the last lamp particle
Take out the yellow accessory and the lamp particle and install them as follows
相同方式將導線藏于積木內
積木安裝還原
Hide the wires inside the building blocks in the same way
Building block installation restoration
多余導線藏于積木內
The extra wires are hidden inside the building blocks
USB接上電池盒【注:電池盒內需自備電池】
Connect the USB to the battery case. [Note: Batteries need to be prepared in
the battery case.
